EPOXY GLUE 5000 WITH FIBER MAT 300/500GM/SQM

Here we use epoxy glue 5000 with both Resin and Hardener in Thick Paste form and the ratio of Resin and Hardener is 1:1. This is applied in a thin layer on the 4 sides of the block as a primer followed by wrapping the 4 sides by net of 500 gm and then applying the Epoxy glue 5000 again so that it bonds with the primer applied on the surface of the block.


PARABEAM SYSTEM WITH EPOXY 5171

Parabeam is a special 3D Glass Fiber being used by the stone industry since 1995 with lots of success.

  • PARABEAM is very well known in the Italian market as the best solution to wrap marble / granite blocks.
  • Compared to the other methods on the market, PARABEAM guarantees absolutely no damages on marble blocks because of its great adhesion on the surface and its flexibility
  • Most of the marble and granite manufacturers processing broken & exotic materials prefers to use PARABEAM to prepare blocks to be cut because it is the safest solution.
  • It is availabe in 50 square metre rolls with height of 127cm available in 5 or 10mm thickness. We nornally suggest 5mm for Block Reinforcement.

Parabeam Compared to other methods

PARABEAM

  • TIME SAVING: the day after, the marble block is ready to be out
  • No Damages guaranteed
  • Easy Application
  • High Quality
  • Higher compressive

OTHER METHODS

  • Long curing time
  • Higher risks for damages
  • Lower quality of products
  • Higher resin needed

Parabeam net has two layers with woven fibers connecting top to the bottom. After applying epoxy it gives a 5 mm thick layer of the Parabeam.