“One of the most important aspect of maintenance of your marble or granite floors or countertops is to seal them using impregnators / sealers. Sealers protect your marble or granite from the entry of water, tea, oil, coffee etc.,

Before deciding to use impregnators / sealers on your marble or granite floors or countertops, you can make a simple test by putting a drop of water on them and check if the water remains as a drop on the surface or does it get absorbed. If the water gets absorbed, it means that you need a good marble / granite sealer / impregnator”

S731(Silane Impregnator)

S731 is a ready to use Anti stain sealer and impregnator that reduces the penetration of water, dirt and oil into rough or honed natural stone surfaces (soft and hard stones), concrete block and unglazed bricks. The colour and structure of the surface is enriched only very slightly. For exterior and interior use.

PACKING: Available in LT 1 packing. Packed in a box containing 12pcs.

Impregnator for granite

Hydroroc (Sealer For Marble And Granite)

Solvent-based economic sealer / anti-stain chemical with good sealing properties for all types of stones. On a perfectly clean and dry surface evenly apply a coat of product using a roller or airless (low pressure) making sure to cover the whole area, avoiding any drop.

PACKING: Available in LT 1 packing. Packed in a box containing 12pcs.

Impregnator for marble

Drai (Water Proof Solvent Base)

Drai is an excellent waterproof sealant, anti-stain, ideal for marble, granite, brick, concrete and natural stones in general. It can be used successfully on floors, tables, working tops, kitchen and bathroom tops, on which the absorption of liquids like water, oil, coffee, wine will be avoided.

It doesn’t form any film, and penetrates deeply into any type of natural stones. It doesn’t turn yellow or change the colour and the look of the treated material, and it allows perspiration. Antistatic protects from rain, smog and grease.

Lay DRAI with a rag or a brush on the desired surface and distribute carefully and uniformly. It will totally dry up in some hours. In order to have the highest protection, it is advisable to repeat the process.

PACKING: Available in LT1 packing. Packed in a box containing 12pcs.

Sealant for granite

Drai (Water Proof Water Base)

It is a water based sealant / anti-stain chemical for marble and granite floors. This offers very high resistance to atmospheric agents, pollutants and UV radiations. The very high resistance features make this product particularly suitable for external protective treatments.

Drai water based is a protective agent combining very good waterproofing and excellent oil proofing. Shake the products before use. It can be applied: by spraying, with rollers or with brushes. For the application of several coats, spread the product wet on wet, due to the fact that the surface becomes hydro-repellent once it is polymerized.

PACKING: Available in LT1 packing. Packed in a box containing 12pcs.

Sealant for marble

Twins 1740 (Water Repellent For Exterior)

Excellent water repellent product suitable to treat surfaces in terracotta, stone, marble, bricks… TWINS 1740 doesn’t change the natural aspect of treated surface; it protects from inclemencies and delays the formation of limescale and musks. Solvent-based product.

On a well dry surface apply a plentiful coat of product using a roller or airless, making sure to cover the whole surface, avoiding any drop. On particularly absorbent surfaces apply a second coat.

PACKING: Available in LT 1 packing. Packed in a box containing 12pcs.

Sealer for marble

Twins.Tw (Anti-Stain Protection For Polished Marble, Granite)

Excellent sealer / anti-stain chemical specifically developed for polished surfaces in marble, granite and stoneware. TWINS.TW is an excellent water and oil repellent. Solvent-based product. It doesn’t change the colour of marble or granite.

On a well clean and dry surface evenly apply one coat of TWINS.TW performing circular movements, using a cloth. Once completely dry, remove the eventual excess using a pad or a cloth. On high absorbent surfaces we recommend applying a second coat.

PACKING: Available in LT 1 packing. Packed in a box containing 12pcs.

Sealer for granite

Twinsebin.M (Protection For Unpolished Marble And Granite)

Anti-stain treatment specifically developed for unpolished surfaces in marble, granite and stone. TWINSEBIN.M is an excellent water and oil repellent, suitable for indoor and outdoor surfaces. It doesn’t sensitively change the surface color. Solvent-based product.

On a well clean and dry surface evenly apply a coat of TWINSEBIN.M using a cloth, a mop or by spray (airless). On particularly absorbent surfaces we recommend applying a second coat at least 3 hours from the first one.

PACKING: Available in LT 1 packing. Packed in a box containing 12pcs.

Protection for unpolished Marble and Granite

S232w( Stain Protection – Water Based)

Anti-stain treatment specifically developed for unpolished surfaces in marble, granite and stone. TWINSEBIN.M is an excellent water and oil repellent, suitable for indoor and outdoor surfaces. It doesn’t sensitively change the surface color. Solvent-based product.

On a well clean and dry surface evenly apply a coat of TWINSEBIN.M using a cloth, a mop or by spray (airless). On particularly absorbent surfaces we recommend applying a second coat at least 3 hours from the first one.

PACKING: Available in LT 1 packing. Packed in a box containing 12pcs.

Stain Protection

S234n(Stain Protection - Extra)

S234N is a Premium range ready to use impregnator which reduces the penetration of water, dirt, oil and grease into marble, granite and other stone floors. S234N is also suitable for polished surfaces. For interior and exterior use.

Once dry the residual material is not hazardous to health and is approved for use with food stuffs by the LFGB (German Food and Feed Code).

PACKING: Available in LT 1 packing. Packed in a box containing 12pcs.

Stain Protection

S235 (Stone Sealer - Matte Finish)

S235 is a ready to use colour enhancing surface sealant with a matte finish that reduces the penetration of water and dirt substances into honed, brushed, sandblasted, flamed or riven natural stone (soft and hard stones), agglomerates and terrazzo. The colour and structure of the surface will be enriched, leaving a matte finish. Facilitates regular cleaning and overall maintenance, especially on rough and textured surfaces. For interior and exterior use.

Once dry the residual material is not hazardous to health and is approved for use with food stuffs by the LFGB (German Food and Feed Code).

PACKING: Available in LT 1 packing. Packed in a box containing 12pcs.

Stone Sealer

S237( Stone Sealer – Satin Finish)

S237 is a ready to use colour enhancing surface sealant with a satin finish that reduces the penetration of water and dirt substances into honed, brushed, sandblasted, flamed or riven natural stone (soft and hard stones), agglomerates and terrazzo. The colour and structure of the surface will be enriched, leaving a satin finish. Facilitates regular cleaning and overall maintenance, especially on rough and textured surfaces. For interior use only.

Once dry the residual material is not hazardous to health and is approved for use with food stuffs by the LFGB (German Food and Feed Code).

PACKING: Available in LT 1 packing. Packed in a box containing 12pcs.

Satin Finish

S239 (Stone Sealer – High Gloss)

S239 is a ready to use colour enhancing surface sealant with a gloss finish that reduces the penetration of water and dirt substances into honed, brushed, sandblasted, flamed or riven natural stone (soft and hard stones), agglomerates and terrazzo. The colour and structure of the surface will be enriched, leaving a gloss finish. Facilitates regular cleaning and overall maintenance, especially on rough and textured surfaces. For interior use only.

Once dry the residual material is not harmful to health

PACKING: Available in LT 1 packing. Packed in a box containing 12pcs.

High Gloss

S240 – (Jobsite Protector And Grout Release)

S240 is a concentrated solvent-free pre-grout treatment. S240 forms a protective film on the surface that reduces the penetration of adhesive, cement and grout into all finishes but is especially good for sawn, sandblasted, flamed and riven natural and artificial stones. S240 facilitates the subsequent cleaning and general maintenance of the surface. For interior and exterior use.

After grouting, sponge off grout residue with water as well as possible. Once installation is completed, S240 and the remaining dirt should be removed with R155 Intensive Cleaner –acid free.

PACKING: Available in LT 1 packing. Packed in a box containing 12pcs.

Jobsite protector and grout release

S243 (Porcelain Tile Impregnator)

S243 is a ready to use solvent based impregnator that reduces the penetration of water, dirt, oil and grease into polished, honed and unglazed porcelain tiles. The colour and structure of the surface is only minimally affected. For exterior and interior use.

Once dry the residual material is not hazardous to health and is approved for use with food stuffs by the LFGB (German Food and Feed Code).

PACKING: Available in LT 1 packing. Packed in a box containing 12pcs.

Porcelain Tile Impregnator

S749 (Pre-Installation Impregnator)

S749 is a ready to use solvent free impregnator to be used on all faces and sides of a tile or module prior to installation. S749 restricts the formation of efflorescence; water marks and reduces the risk of warping. It also reduces the penetration of grout into the surface of natural and artificial stone, brick, clay and terracotta panels. The penetration of moisture will be greatly reduced thereby reducing the risk of chemical reactions caused by minerals within the body of the stone. For interior and exterior use.

PACKING: Available in LT 1 packing. Packed in a box containing 12pcs.

Pre-Installation Impregnator