P307 (Re-Polishing Fluid)

P307 is a ready to use polishing wax that refreshes worn, scratched and dulled surfaces and enriches the colour and structure of soft and hard natural stones, agglomerates, terrazzo etc. P307 gives the surface a brilliant shine and reduces the penetration of water and dirt. For interior use only.

PACKING: Available in LT 1 packing. Packed in a box containing 12pcs.

Granite Shiners

P323 (Polish Preserver – No Rinse)

P323 is a concentrated emulsion that refreshes worn and dulled natural and artificial stone surfaces. A silky shine is developed without the need for polishing. The protective film that develops with regular use increase water and dirt resistance and makes textured and rough surfaces easier to clean. For interior use only.

PACKING: Available in LT 1 & LT 0.25 packing. Packed in a box containing 12pcs & 30pcs respectively.

Marble Shiners

P717 (Liquid Polishing Wax)

P717 is a ready to use, quick drying polishing wax that enhances the colour and structure of soft and hard natural stone, agglomerate marble etc., and gives the surface a brilliant shine after polishing. The penetration of dirt and water is also reduced. For interior use only.

PACKING: Available in LT 1 packing. Packed in a box containing 12pcs

Shiners for granite

Lantastar (Silicon-Wax)

SSilicon wax-based shiner for marble, granite and gres floors. Treated surfaces will become shiner and natural colors enhanced. The product doesn’t make film on the top. Solvent-based product.

On a well clean and dry surface apply LANTASTAR using a cloth and performing circular movements. Once dry, polish the surface using a machine equipped with white disk or with a clean cloth.

PACKING: Available in LT 1 packing. Packed in a box containing 12pcs

Shiners for marble

Extra Wax (Solvent Based Shiner)

Liquid wax solvent based for marble and granite is particularly suitable to improve the gloss and brilliance of stones. Apply a few drops of product on the perfectly cleaned surface, spreading with a clean cloth, and take off the excess with fine steel wool. Light resistant, doesn't turn yellow.

PACKING: Available in KG1 packing. Packed in a box containing 12pcs.

Colour Enhancer Sealer marble

GRANILUX (SHINER FOR MARBLE AND GRANITE)

It is a very good shiner for all marble & granite. It increases the gloss of significantly. It is formulated with a mix of silicone resins and waxes. Very easy to rub.

PACKING: Available in LT 1 packing. Packed in a box containing 12pcs.

Colour Enhancer Sealer granite

Extra Wax (Water Based Shiner)

Economical range liquid water based wax, suitable for floors. Used to clean and protect polished floors from stains and footmarks. It is easy to apply, gives you very high outcome, and doesn't leave any rings. Clean the floor thoroughly, pour a few drops of wax onto it, spread evenly with a damp cloth dilute with water (1 cup every 5 Lt of water). It can be used also for daily cleaning of the marble. Once dry, polish with a woollen cloth or polishing machine.

PACKING: Available in KG0.9 packing. Packed in a box containing 12pcs.

Granite Colour Enhancer

Extra Wax, Solid Neutral (Shiner In Paste)

Solid wax, polishing and protective, based on concentrated active substances, Easy to apply, increases the "wet look". Suitable for industrial use, ideal for manufactured products which require a better finish. Lay a small quantity of this shiner on marble or granite surface to be treated using a clean cloth. Polish by vigorously rubbing with a woolen cloth. Better results can be achieved by using a machine provided with felt. Beside neutral colour, green, red & black are also available.

PACKING: Available in KG1 packing. Packed in a box containing 6pcs.

Extra Wax, Solid Neutral

Extra Drops (Wet Look)

It is the ideal products for the "wet look" on all antiqued materials and for finishing all external floors, showing up the original shade. It is applied on all natural materials, stone, granite, marble, with an old looking finish, flamed, sanded. It also provides a good waterproof effect. Extra Drops is ready to use: apply with brush one or two coats , according to the desired final effect , and wait some minutes for complete drying

PACKING: Available in KG1 packing. Packed in a box containing 12pcs.

Extra Drops

Twinswet ( Wet Look, Tone-Enhancer Protector)

Tone-enhancer protective product specifically developed to treat medium-high absorbent surfaces like marble, cobblestone and stones. It confers a pleasant “wet look effect” and a moderate shiny aspect. It is suitable for indoor or covered outdoor surfaces. Solvent-based product.

On a well clean and dry surface apply TWINSET performing circular movements, using a cloth, distributing as evenly as possible. On particularly unpolished surfaces, we recommend applying the finishing product HIDROSEBIN, in order to make upkeep operations easier.

PACKING: Available in LT 1 packing. Packed in a box containing 12pcs.

Twinswet

Extra Lux (High Gloss Varnish)

The Extra Lux self- polishing varnish is formulated with resins and very selected waxes; the mixture ensures flawless polishing on marble and granite. The formula has been developed to provide the treated surface with a lasting polish, even after exposure to atmospheric conditions.

Lab tests have shown that marble treated with Extra Lux and then exposed to UV-A light for 40 days doesn’t undergo any alteration.

Extra Lux has a wide range of application, in all cases where traditional polishing may be difficult: corners, borders, edges, columns, etc, and on elements already installed. It is suitable to obtain "wet look", even on unpolished display materials: blocks, slabs, tiles, etc. Apply with a buffer, cloth or paint brush, on completely dry and preferable rubbed up material: spread the varnish evenly and without scrubbing. According to desired effect, a second application may be done, approx. 15 min after the first coat. Total drying time depends on temperature, and requires approx 30 minutes.

PACKING: Available in KG1 and LT0.2 packed in a box containing 12pcs and 20pcs respectively. Available in spray in LT 0.4 packed in a box containing 12 pcs.

Extra Lux

Brillo (Solvent Based Colour Enhancer)

Liquid silicon based wax, used to renew the polish on marble, granite, natural stones and gres. It can be used to clean and protect kitchen and bathroom ceramic tiles from dirt and smog.

The Very high quality components of its formula provide a triple action on treated support removing grease and smog; polishing with highlighting of colours and veins; waterproofing and providing superior resistance to stains like water, wine and oil.

Apply with a clean cotton cloth. After drying, which requires a few minutes, the surface must be polished with a soft clean cloth; It is advisable to work in a well ventilated area.

PACKING: Available in LT0.75 packing. Packed in a box containing 12pcs.

Solvent Based Colour Enhancer

Brillo (Water Based Colour Enhancer)

This economical product is a silicone emulsion for marble and granite. It increases and makes uniform the polish on marble and granite; it covers any marks left by abrasives, and protects the surface from stains. It has a good water-oil-proof capacity.

Brillo water based is a water emulsion which allows transpiring on all treated surface.

PACKING: Available in LT1 packing. Packed in a box containing 6pcs.

Water Based Colour Enhancer